How To Paint A Room Professionally

How to Paint a Room Professionally – Discover the Best Tips

If you want to know how to paint a room professionally, then this article is for you. Painting the house is certainly one of the best ways to improve the look of your home.

You “clean” the face of the walls -which, with use, accumulate rubbings, scratches, and even some scribbles. Moreover, just by changing the color, your house will look new.

Give it a lighter tone, and you will have the sensation that the meters have stretched. On the other hand, one more intense tone, and the space will look more welcoming and collected. If you give it a shiny finish, it will seem that you have opened a new window in the living room.

The transformative power of paint is enormous. If you dare to paint your house, with these 10 tips and tricks from a professional, you can do it yourself, and for very little money!

How to Paint a Room Professionally

The Best Tips

  1. Plan Where to Start

If you want to paint the whole house, which room will be the first? The idea is to clear the rooms as much as possible. If you paint the emptiest room first, it will free up the rest and make it easier to move around.

Then, prepare the material. Check that you have everything, including a masking tape, plastic and protective paper, putty, and sandpaper. Also, you should have a spatula, large and small roller, roller tray, paint and enamel. If you have old sheets, you can save the plastic.

  1. Try Different Colors to Get It Right

If you are in doubt about the color, make brushstrokes on walls where light is shining differently and look at them at different times of the day. Keep in mind that the paint darkens as it dries.

A special color? Different painting companies offer a very extensive palette of color references to choose from.

It is a very practical option, especially if you want to repaint a room or do some rework later on. If you want to make the mixture yourself, you will have to start with a white paint and be careful, as some of them tile.

  1. Prepare the Walls Well and Make Arrangements

If they are in poor condition, they must be sanded well, cleaned of the dust created, given a primer and putty before painting. Paint alone does not eliminate imperfections.

Mini-imperfections? You only need some putty for small cracks and holes. Wait for it to dry, since sometimes you have to putty. Then sand and clean.

  1. How to Paint a Room Professionally – Paper And Stucco

Painting is a complicated and delicate job, so it may be best to hire a professional. If there is stucco, the best tip is to remove it, especially if the grain is thick. If it is very fine and well gripped, the wall can be smoothed out with putty.

Paper off! It must be removed, sanded, given fix or sealer, up to three coats of putty, and at least two coats of paint.

  1. Protect Furniture and Surfaces

Put masking tape on baseboards, roof corners, doors and non-wooden frames – if they are wooden, they will also need to be painted – and cover the tape on the blinds.

The switches, if you can remove them; if not, put tape on them too. On the floor, better paper than cardboard, because paper is flexible and repels more than cardboard.

  1. How to Paint a Room Professionally – Choose the Most Suitable Paint

If the walls are in good condition, you can use plastic paint for all rooms, including the kitchen and bathroom. In addition, they are becoming more and more natural, so they hardly give off any paint smell. But you have other options:

Thixotropic. With a great covering power, it is ideal for walls with grease, smoke, humidity, and even mold and rust stains.

Anti-allergies. They prevent the proliferation of mites and fungi, and minimize the emission of volatile compounds (best for allergy sufferers).

100% Eco. They are breathable.

Odorless and anti-odor. There are paints that can even scent your house because they have natural essences that give off aroma slowly. However, the effect will only last a few days. And you can also do the opposite, neutralize odors with paints that absorb them. These are photocatalytic paints.

And the glazes? Choose acrylic rather than synthetic: You’ll reduce the solvents. Although you should know that, according to the professionals, better results are obtained with plastic paint.

  1. Ceilings, Corners and Walls

Start with the roof so you can cover the drops that fall on the walls. But if there are any defects to be filled in, start there and take advantage of this to paint corners.

Smooth corners. To avoid the difference between the brush stroke of the corner and the rest of the wall, paint them first, with a brush, and blur the line with a roller.

  1. It’s Carpentry Time

Paint the doors and joinery with a flat brush and small rollers with very short hair or foam. Ideally, you should work with two: a wet one, with which you load the paint surface, and a dry one, with which you comb it.

Paint by hand! And don’t put painter’s tape on the wall to avoid staining it, because when you take it off you can lift the paint and the remedy will be worse.

  1. Six Hours Later, another Coat

Open the windows wide so that the paint dries well and soon. In the case of plastic paint, wait at least six hours between coats. If it is enamel, pay close attention to the instructions on the container.

Single-coat paint. If you use this type of paint, you will not have to give it a second coat, although the application may cost you a little more. Consider this before you decide.

  1. Remove the Tape and Touch Up

Once it is dry, do not wait to take the tape off the whole house. If you leave it and it dries, there is a good chance that it will break, leave a trail of glue on the wall, or take the paint with it.

Final touches. Once everything is clean, take a look and with a small brush or a small roller, fix the possible flaws.

Conclusion – How to Paint a Room Professionally

And now, what? You see yourself painting without any problem, right? Go for it.

 

Scroll to Top