how to paint a wall evenly

How to Paint a Wall Evenly – All The Factors to Consider

If you want to know how to paint a wall evenly, then this guide is for you. At first glance, there is no simpler work than repainting a wall. And yet, it is easy to leave marks, or to obtain an unattractive result when applying mural paint. The result is a flaking paint, obvious traces, and a whole job to do over again!

To avoid finding yourself in this situation, read on to discover the best way to paint a wall.

How to Paint a Wall Evenly – The Ideal Method for Applying Wall Paint

One mistake you can do when trying to apply mural paint is to think that you only one coat of paint to get the job done. To find out how to paint a wall properly, take your time and go through all the tips in this article.

Criteria for Choosing a Mural Paint

Never neglect the impact of your choice of paint on your work. A low-end paint would force you to apply more than two coats, which increases the risk of streaks, or imperfect surfaces.

Opting for a quality paint allows you to work on a maximum of two coats, and obtain a uniformly painted wall.

When choosing your paint, it is essential to think carefully about the following points:

How to Paint a Wall Evenly: Color and Finish

When you decide to freshen up the paint on your walls, it is above all for an aesthetic effect. Therefore, it is important to think carefully about the color and finish of your wall painting:

Indoors, choose a color that matches your furniture, ceilings and flooring.

Outdoors, make sure you ask your town hall about the colors of paint tolerated for your facade.

The idea is to choose your color carefully, so that it matches your preferences and does not tire you out within a few weeks.

The Type of Support

There are types of paint suitable for all types of surfaces: brick, plaster, iron and more.

When choosing a wall painting, the first thing to look for is the type of support. Always check that the paint you choose is well adapted to the material your wall is made of.

Also, choose a paint that is suitable for the destination. An exterior wall paint does not have the same characteristics as an interior wall paint.

This guarantees a better hold and a perfect result.

Brand and Quality

If you’re wondering how to paint a wall well, start by buying quality paint. Working with a recognized brand of paint makes your job much easier.

You will inevitably forget about low-end paints, which are more difficult to apply, with disappointing results.

Remember that in terms of paint, quality is synonymous with durability!

Namely: always beware of single-layer wall paints. No matter what your brand of paint says, nothing beats two coats when you want to paint your wall evenly.

Painters in your area will send you their free estimates!

How to Paint a Wall: All The Steps

There is no secret to painting your walls without leaving a trace: you just have to apply a serious method. We have listed for you the different steps to follow so that your painting work leads to a satisfactory result:

  1. Preparation of the Support

Once your paint has been well chosen, it’s time to start painting.

Before painting a partition or wall, it is essential to prepare the surface properly. This goes through the following steps:

Remove the old coating: if there is any coating or traces of paint remaining, consider stripping or sanding the wall to remove them.

Repair the wall: before applying the paint, repair any cracks with a plaster. Once the plaster is dry, sand with fine-grained sandpaper to ensure that the wall is flat.

  1. Preparation of the Work

Before painting a room, remember to protect all the elements you do not want to get dirty. Indeed, paint stains are not forgiving on furniture or flooring. Outdoors, a mural can easily ruin a patio or kill plants.

Before starting the work, it is therefore essential to:

Empty the room of all furniture.

Put a tarpaulin along the walls or above the furniture.

Apply masking tape to baseboards or ceiling edges.

Also, remember to wear suitable clothing (work clothes and gloves). If you are handling oil-based paints (such as glycerol paint), pay close attention to the ventilation of the premises, and wear a protective mask.

If you work at height (if you use a stepladder or ladder), always remember to wear a helmet to avoid any accidents.

Important: if you need to paint walls at height, it is better to ask someone to help you. One of them will take care of the painting, while the other will maintain the ladder.

  1. Applying a Wall Undercoat Paint

All set! It’s time to start painting.

To facilitate the hanging of a mural, it is best to apply a primer. This will be particularly essential on porous surfaces, or if you are using a medium quality mural.

Here is our advice for this step:

Opt for a primer adapted to the material of your wall.

Use a roller for large surfaces, and a brush for corners and delicate areas.

Always buy quality tools, as low-priced brushes may lose bristles during application.

Remember to clean your tools immediately after use.

For a good application of your primer, remember to cross the passes (making one horizontal and one vertical pass). Once the undercoat has been applied, let it dry for the time indicated before starting to paint the wall.

    1. How to Paint a Wall Evenly: Applying Your Mural Paint

After allowing the undercoat to dry, it is time to apply the paint.

For best results, it is best to apply the paint in two coats.

Follow these tips to avoid brush marks on the wall :

Once again, use a paint roller for large areas and a brush for corners.

Dip the roller halfway into the paint and remove the excess before you start painting.

For brushes, dip the brush one-third into the paint.

Crossing the passes allows you to leave no traces.

Work wall by wall, without interrupting your work. A stop in the middle of a wall will leave a visible trace when drying.

For a successful mural painting, respect the drying time between two coats.

For the wall to be perfectly painted, the paint should not dry too quickly or too slowly. Finally, never neglect the impact of weather conditions on the final result!


Scroll to Top