what kind of paint do you use for bathroom

What Kind of Paint Do You Use For Bathroom – The Best Guide

What kind of paint do you use for bathroom? The bathroom is a special room in your house that needs more protection and hygiene. Since it is a room that is particularly prone to humidity, you should paint it with a bathroom paint that mold cannot attack.

The paint should be capable of avoiding the settlement of micro-organisms, and resist jets of water on the walls without being damaged. Furthermore, it should have an aesthetically pleasing result.

High humidity and direct water jets can cause problems on the bathroom walls. Here is how to preserve the appearance and healthiness of these rooms over time, with the right paints.

What Kind of Paint Do You Use For Bathroom

If you think that water vapor passes systematically from the inside to the outside of your bathroom, you should know this is not the case. In particularly humid environments such as the bathroom, high humidity, poor ventilation, and infrequent air exchange create condensation conditions.

Bathroom walls that face outwards are more susceptible to this phenomenon. That is because they have a lower surface temperature.

For example, in the bathroom, after showering the air temperature is 20°C with 60% relative humidity. As you get closer to the surface of the outer wall, the air temperature decreases and the relative humidity increases.

If the temperature on the surface of the wall is 12°C, the air reaches 100% humidity (saturation). Therefore, condensation occurs.

In the long run this can cause proliferation of mold on the walls.

The difference in temperature on the walls, together with the high level of humidity and thermal bridges, are in fact the main causes of the onset of mold.

The presence of a thermal insulation system on the building helps to prevent this problem. It helps to improve the performance of the walls, and increases the internal surface temperature. Thus, it reduces the risk of condensation formation.

If the coat is not present, it is still possible to limit this unpleasant phenomenon, which is unsightly and dangerous to health. That is by using a breathable paint with high diffusivity towards water vapor.

Paint The Ceiling And Walls With A Thermal Effect Paint

When choosing bathroom paint, there is a tendency to consider only the walls. It is important to also consider the ceilings. Mold usually forms right in the upper corners, at the structural thermal bridges.

That is why you should choose a washable anti-condensation paint, with a thermal effect. In addition to the protective effect, this paint improves living comfort by ensuring a warm sensation, even to the touch.

Rehabilitates Bathroom Walls with the Right Anti-Mildew Treatment

In the case of mold already present, it is important to follow the correct restoration cycle before applying the new paint.

Firstly, apply a sanitized disinfectant to the rooting and surrounding areas to kill the microflora, leaving the product to act for 24 hours.

Secondly, rehabilitate the walls with a broad-spectrum matt interior paint. This product is particularly mold resistant, and is ideal for hospitals, schools, and HACCP environments.

Use Water Repellent Enamels If the Bathroom Does Not Have The Coating

In modern homes, decorative paints are the best option if you want to create plays of color on the walls, which also become furnishing elements. It is a fashion that is also spreading in the bathroom, where  glossy, matt or satin finish are now the best options.

What happens, however, if you do not adequately protect the walls from from direct jets of water? The walls can stain or, worse, paint deterioration and plaster detachment can occur.

A valid alternative to tiles is glossy, stained and opaque enamels that you can use instead of tiles. That is even on surfaces particularly subject to water load such as the shower cubicle.

They are therefore the ideal solution for humid environments, where you must ensure maximum hygiene.

These water-repellent and stain-resistant enamels are easy to clean. They combine practicality and aesthetics, thanks to the countless finishes available. These finishes include water-based acrylic-polyurethane enamels, glossy, satin, or matt.

Cover Old Tiles with a Water-based Enamel

Even for renovations, you can choose a paint to renovate the bathroom easily and quickly. That is without costly demolition work. By applying glaze directly on the tiles, you can cover the outdated ceramic coating and give the bathroom a whole new look.

In addition, you will have an anti-condensation protection. These products ensure maximum water resistance and vapor diffusion, so you can use them in rooms particularly subject to humidity.

Conclusion – What Kind of Paint Do You Use For Bathroom

The solutions for painting the bathroom are countless. They allow you to combine aesthetic and functional needs, while ensuring maximum protection of your walls.














Scroll to Top